Characteristics of keel machine:
1. Rolling capacity: width ≤150mm, sheet thickness 0.6-2.0mm
2. Production speed: 6-13 m/min
3. Total installed capacity: about 5.5kw
4. Production area: 15m long X 2.5m wide
1. The equipment is controlled by PLC, and multiple safety protection is set up during normal production.
2. The body of the bed is a steel plate welding piece. And temper treatment, eliminate internal stress, avoid deformation of the fuselage.
3. The forming frame is cast iron structure and tempered. High strength, long service life.
4. The material of rolling roller is 40Cr, and the hardness is HB280 after quenching and tempering treatment.
5. Forming mold material for GCr15, quenching treatment, hardness: HRC56-62℃.
6. The transmission structure is gearbox transmission. Each forming frame has a light steel keel machine. Can ensure the equipment over time, high strength operation, and long service life.
Keel machine processing technology: feed ---- guide ---- roll molding ---- cut off ---- receiving material
Keel machine equipment composition: feeder, guide frame, molding host, calibration device, length cut off part, receiving table, electrical control part, etc.